RT.jpg
 

WF reducing tee

HIS weld fittings conform to ASTM A-269 and ASME standards, with qualified ASME welders and procedures to provide the best weld. Fittings are made of 304 stainless steel, but 316/316L is available upon request.

FINISH

Standard finish for fittings is Mill Finish; other finishes available upon request. Add number/letter to the end of the part number to specify the finish. M = Mill finish, 7 = #7 polish OD/ID.

Measurements are listed in inches (mm).

Part No. Tube Size A B
WF-16-12RT304T1M1.00 (25.4) X 0.75 (19.1)3.75 (95.3)2.13 (54)
WF-18-12RT304T1M1.50 (38.1) X 0.75 (19.1)4.50 (114.3)2.25 (57.2)
WF-18-16RT304T1M1.50 (38.1) X 1.00 (25.4)4.50 (114.3)2.38 (60.3)
WF-20-12RT304T1M2.00 (50.8) X 0.75 (19.1)6.00 (152.4)2.38 (60.3)
WF-20-16RT304T1M2.00 (50.8) X 1.00 (25.4)6.00 (152.4)2.38 (60.3)
WF-20-18RT304T1M2.00 (50.8) X 1.50 (38.1)6.00 (152.4)2.50 (63.5)
WF-25-18RT304T1M2.50 (63.5) X 1.50 (38.1)6.00 (152.4)2.75 (69.9)
WF-25-20RT304T1M2.50 (63.5) X 2.00 (50.8)6.00 (152.4)3.25 (82.6)
WF-30-18RT304T1M3.00 (76.2) X 1.50 (38.1)6.50 (165.1)3.00 (76.2)
WF-30-20RT304T1M3.00 (76.2) X 2.00 (50.8)6.50 (165.1)3.50 (88.9)
WF-30-25RT304T1M3.00 (76.2) X 2.50 (63.5)6.50 (165.1)3.25 (82.6)
WF-40-20RT304T1M4.00 (101.6) X 2.00 (50.8)7.75 (196.9)4.00 (101.6)
WF-40-25RT304T1M4.00 (101.6) X 2.50 (63.5)7.75 (196.9)3.75 (95.3)
WF-40-30RT304T1M4.00 (101.6) X 3.00 (76.2)7.75 (196.9)3.75 (95.3)
WF-60-30RT304T1M6.00 (152.4) X 3.00 (76.2)10.00 (254)4.75 (120.7)
WF-60-40RT304T1M6.00 (152.4) X 4.00 (101.6)10.00 (254)4.88 (123.8)